Shanghai Tuole International Trade Co., Ltd.
Main products:Hose Joint,Hose
Products
Contact Us
  • Contact Person : Ms. wang whitesnow
  • Company Name : Shanghai Tuole International Trade Co., Ltd.
  • Tel : 86-21-60719631
  • Fax : 86-21-60719631
  • Address : Shanghai,shanghai,Room 509, No. 111 East Songqiao Road, Baoshan District, Shanghai 200940, China
  • Country/Region : China
  • Zip : 200940

Water pressure testing pump in 4D-SY 6.3-80MPa Auto-control series

Water pressure testing pump in 4D-SY 6.3-80MPa Auto-control series
Product Detailed
Water pressure testing pump 4D-SY Rated exhaust pressure:6.3-80MPa Flux:16-530L/h Motor powder:1.1-1.5Kw Weight:215kg

Water pressure testing pump in 4D-SY 6.3-80MPa Auto-control series

*Auto-control pressure testing pump in 4D-SY (6.3-80MPa) series achieves automatic control of pressure by adding a set of control devices on the basis of the original electric pressure testing pump. 

* 4D-SY(6.3—80MPa) Auto-control series of CNC pressure testing pump is the up-to-date series product designed by the Joint Design Group for Hydraulic Test Pump of the General Machinery Research Institute under the Ministry of Machine-Building Industry.

* 4D-SY(6.3—80MPa) Auto-control series features high level of “Mechanization, Electrification and Automation”, long service life, stable performance, flexibility and lightweight that the previous products have, additionally, a drive unit and cross-like converter are added. Therefore, all the performance indicators of this series product have met the requirements; various performances become more stable and reliable with safe and easy operation and power efficiency. In its structure, an enclosed water tank is used, thereby reducing the height of the whole unit and making it more compact and attractive.

* 4D-SY(6.3—80MPa) Auto-control series of CNC pressure testing pump is mainly used in hydrostatic test for various pressure containers, oxygen cylinder, pipe, valve and steam boiler. It is a device in the new technology of processing and high pressure source for liquids in the lab. The device is specially designed with clean water and emulsion livid of 5-60°C and oil of viscosity no more than 45 mm2/s as the working media. The liquid is filled up quickly and pressure goes higher immediately when doing the testing initially.

* 4D-SY(6.3—80MPa) Auto-control series is to reduce the testing time, has great flow volume. When the pressure is over 1.6Mpa (the pressure can be automatically adjusted lower), the flow volume is automatically reduced in order to keep the testing slow and stable. Thus the product has two flow volumes under high and low pressure, and it changes automatically. Any kind of pressure testing can be performed under the rated pressure output. Its working temperature is 5-60°C.

* 4D-SY(6.3—80MPa) Auto-control series of CNC pressure testing pump has 7 models and its basic parameters are shown in Table Parameters. When selecting the hydraulic test pump, the rated pressure should be chosen based on the testing pressure needed. The flow requirement shall also be considered.

Parameters:

MODEL

rated exhaust pressure (MPa)

Flux L/h

Plunger Diameter

Reciprocating times

Motor power (KW)

Overall SizeLxWxH (mm)

Weightkg

High Pressure

Low pressure

High pressure

Low pressure

4D-SY160/6.3

6.3

160

530

32

45

51

1.1

815×480×1055

215

4D-SY100/10

10

100

450

25

4D-SY63/16

16

63

400

20

4D-SY40/25

25

40

380

16

4D-SY30/40

40

30

360

14

1.5

840×480×1055

4D-SY22/63

63

22

340

12

4D-SY16/80

80

16

340

10

Voltage: AC 380V

Water pressure testing pump in 4D-SY 6.3-80MPa Auto-control series



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.